Embedded channel and bracket set
PV Mounting Embedded Channel and Accessories
Embedded channel and bracket components used to build PV mounting structures.
Application
PV Embedded Channels and Accessories
Embedded channel and bracket components for PV mounting structures, produced alongside the support system range.
PV mounting structures need a fixing that can be adjusted after the concrete or the structure is finished. An embedded channel leaves a continuous slot in the surface, so the mounting bracket can be positioned where the module layout requires it.
QINYU produces the embedded channel together with the bracket components, bolts and channel nuts used in these structures.
Technical basis
- Channel and bracket components are produced in Q235B steel to GB/T 700-2006.
- Hot-dip galvanising to GB/T 13912-2002 is available for outdoor exposure.
Standards are quoted as the design reference used in our technical documentation.
Related products
Products for this application
Product range
Curved embedded section
Arc-Shaped Embedded Channel
Curved cast-in channel that follows the profile of an arch or curved slab and leaves a continuous fixing slot in the concrete…
YE-21·HDG to YE-72·HDG
Hot-Dip Galvanised Single Strut Channel
The single-sided channel range with a hot-dip galvanised finish for outdoor, tunnel and humid installations.
Discuss a pv embedded channels and accessories project
Send the service layout and the pipe or duct sizes and we will match the braces and supports to the installation.